2009-2013 Ram 1500 w/ 545rfe 65rfe Center Console Neutral Manual Override Plastic Cover Plug preview

Files (1)

RFE Neutral Plug.stl

STL

361.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
RFE Neutral Plug.stl	Primary model	361.8 KB STL	Slice file	Slice file	Slice file	Print with a heated chamber if available for better layer adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

2009-2013 Ram 1500 w/ 545rfe 65rfe Center Console Neutral Manual Override Plastic Cover Plug

0 downloads27 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

The little plastic plug the covers the Neutral override in your 545RFE or 65RFE equipped 4th gen Ram. May fit others. You should probably use something heat more heat resistant than PLA. It the summer with the windows up, PLA will warp and the thing will just be resting under the force of gravity.