Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| RAM_5R.stl | Primary model | 42.3 KB STL | 10g $0.23 | 11g $0.25 | 23g $0.56 | Ensure a brim or raft is used if necessary for adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
UV-5R and mic stand for Ram 1500 (4th gen)
Shared by
3DPrintedCarPartDescription
I made this to take up an otherwise useless space in my truck, since I didn't have room anywhere else. This is a very niche solution for a very niche problem,so It is made to slot right into the small side pocket of the center console. You could use double-sided tape to keep it down, but you shouldn't need to. The radio and microphone stay locked in place using the grooved on the back side of the model, preventing them from moving around when you pick up the mic. I made this with the stock UV-5R and the Baofeng UV-5R mic, so it has not been tested with any other setup. It should work with most radios, as long as the back clip is long enough.
Compatible Cars
Originally published on thingiverse.com by Bill Hering (TisChaBoi) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
