Files (1)

Ram_1500_phone_holder_finall.stl

STL

266.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 75%	100% solid	Recommendation
Ram_1500_phone_holder_finall.stl	Mount / bracket	266.5 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Ram 1500 phone holder

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

this is a simplified phone holder for my 2018 ram 1500 it goes in the coin try above the dash. uses factoy screws I use it was a iphone 8 plus. it will fit many others. Thanks for taking a look and hope you like it. no supports needed. I printed it in abs due to heat in the car on hot summer days. 100% infill at 100% scale.