Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ram 1500 Truck Dash Switch Mount
Shared by
3DPrintedCarPartDescription
This is a switch mounting plate that fits 2013-2018 Ram 1500 (probably others). Goes in place of the AC outlet blank (the piece they install if you don't get the 110VAC outlet). Provided are a 2x2 automotive rocker switch mount, and one for 2 switches and a 42mm Gauge (42.5mm cutout). There is also a blank, so you can re-mix your own! I modeled this in Solidworks at the request of a friend. I suggest printing face down with supports for the screw tabs. 100% infill for strength. Use a higher temp filament like ABS, so it wont warp in the hot cab (PLA will warp). Jan 2020 Update: Added STEP file of the blank plate for remixing convenience (hope it works). Thanks for looking. If you make it, post a pic!
Compatible Cars
Originally published on thingiverse.com by Nate Strom (Ironstrom) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
