Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Range Rover Sport Keyfob Button Overylay
Shared by
3DPrintedCarPartDescription
Update 11/25/16 Bottom "Land Rover" button overlay finally wore out so I made a version to fill all button holes as well as improved function. Printed this one with.25mm nozzle. Turned out OK Original rubber overlay for lock/unlock buttons had long since worn through. I was using good old Super 33 to cover the holes and it served well...as always, but it was time for an upgrade. Not perfect cosmetically, but it gets the job done. Printed this in SemiFlex and it works so well that my wife says its the best thing I've made with the 3D printer...YES! Victory is mine! Just remove any of the original overlay rubber surrounding the lock/unlock buttons and press this in. Done. You have now successfully justified your 3D printer purchase with your wife....well...maybe.
Compatible Cars
Originally published on thingiverse.com by (Pelphry17) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
