Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Rear cupholder for Tesla Model S
Shared by
3DPrintedCarPartDescription
This is a rear passenger cupholder for Tesla Model S manufactured before September 2016, when rear cupholders became standard. The design uses two straps that slide under the armrest and are joined with the holder using small nails or paperclips etc. It requires no glueing to the armrest and can be easily removed. The holder folds upwards to give access to the ventilation controls behind. The cups are hollow enough to let the ventilation pass through without any issues. The holder itself might require some supports around the holes for the cups. Ps. If you like this design and are planning to buy a new Tesla Model S or X, then please consider using my referral link below, which will give you free Supercharging as long as you own the vehicle: http://ts.la/johan9011
Compatible Cars
Originally published on thingiverse.com by Johan Nyren (johannyren) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
