Files (2)

red_bull_adapter.stl

STL

1.1 MB

red_bull_adapter_blank.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
red_bull_adapter.stl	Printable file	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
red_bull_adapter_blank.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Red Bull cup holder adapter

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a adapter for the 8.4 oz RedBull cans. Designed for a 2017 Subaru WRX, Im sure would fit many other vehicles. Side note I first printed in PLA after a few days in excess of 100deg F it deformed... if in cooler climate would be fine. Printed this one in abs and seems to be holding up well.