Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| RenultCapturUSB.STL | Cover / cap | 40.3 KB STL | 10g $0.23 | 10g $0.25 | 23g $0.55 | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Captur USB Passthrough
Shared by
3DPrintedCarPartDescription
I needed to route the Dash cam cable for my girlfriends car to the 12V socket, I noticed there's a pop out panel so printed a new one with a slot for the cable on my Ender 3. Printed with Simplify 3d with no supports, bed 60 degrees and nozzle 210.
Compatible Cars
Originally published on thingiverse.com by Nat Klopper (natman151) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
