Renault Clio IV - Speaker Adapter 165mm - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Renault Clio IV - Speaker Adapter 165mm

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter to mount 165mm speakers in the front doors of a Renault Clio IV - might be compatible with other models as well. It is designed to use M4 threaded inserts to mount the speaker to the adapter. It's a very tight fit, I heated the inserts and then screwed them in the holes. You first need to drill out the rivets to remove the original speaker. Now you can mount the printed speaker adapter with some screws and self locking nuts. There is a slot on the back side which is meant for the speaker cables to route through. I also used some silicone on the back to create a good seal between the adapter and the plate you are mounting it to. Once the adapter ist mounted the speakers can be screwed in with some M4 screws.