Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| guide.stl | Primary model | 937.4 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print bed for optimal adhesion. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Logan steering shaft cover guide
Shared by
3DPrintedCarPartDescription
Владельцы Рено Логан и его производных (Сандеро, Лада Ларгус) знают, что из-за значительно расстояния между ниши в нижней части кожуха рулевого вала, откуда выходит саморез и местом, где он должен крепиться, очень часто трудно установить саморез в нужном положении при сборке кожуха. Эта направляющая исправляет недостаток и упрощает обратную сборку. ============================= The owners of Renault Logan and its derivatives (Sandero, Lada Largus) know that due to the significant distance between the niche in the lower part of the steering shaft casing, from where the screw comes out and the place where it should be attached, it is very often difficult to install the screw in the desired position when assembling the casing... This guide corrects the flaw and simplifies reassembly.
Compatible Cars
Originally published on thingiverse.com by Vlad Dmi (vdm) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
