Replacement for Tesla Model 3 hitch plug - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Replacement for Tesla Model 3 hitch plug

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Especially for very short hitch cables the placement of the hitch plug at the tow bar is more than sub optimal. So I create a cable that allows the plug placement directly at the hook. Following additional parts are needed: * 1 x Lowering head screw 6x60mm (Top hook holder screw) * 1 x Lowering head screw 6x70mm (Bottom hook holder screw) * 3 x Screw 5x25mm * 1 x Hitch plug (for the car side) * 1 x Car plug (hitch side, I use Hella) * 1 x Cable (min. 9 wires) You can see at the photo, that my cable is too long. If you find an angle plug for the car side, it is possible to hide the whole cable under a cover with one hole.