Rifter, Berlingo, Combo 2018 USB cable holder - image

Files (2)

Bottom.stl

STL

492.3 KB

Top.stl

STL

571.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bottom.stl	Printable file	492.3 KB STL	Slice file	Slice file	Slice file	Use double-sided tape to attach the bottom part to the hole in the car
Top.stl	Printable file	571.7 KB STL	Slice file	Slice file	Slice file	Use double-sided tape to attach the bottom part to the hole in the car

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Rifter, Berlingo, Combo 2018 USB cable holder

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is my first contribution here. I designed this thing which I don't even know what to call. It kind of holds in place the USB cable on the new Peugeot Rifter, Citroen Berlingo and Opel Combo 2018 models. There's a pretty deep hole in those vehicles without the grip control rotary thing, which by default, only serves as a place to gather dust. In order to attach it to your car, you'll need double-sided tape to attach the bottom part to the hole where it goes. Needless to say, your car should NOT come with "grip control" I'm attaching the Fusion360 file so that you can modify as you wish. I designed it with tolerances in mind, so that you can fit both parts and place it in your car easily.