Roof bars connectors cover (Suzuki Swift 3 and other models) - image

Files (2)

RoofBarsC_V1.2.stl

STL

535.4 KB

RoofBarsC_V1.2_Supports.stl

STL

9.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
RoofBarsC_V1.2.stl	Printable file	535.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
RoofBarsC_V1.2_Supports.stl	Accessory piece	9.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Roof bars connectors cover (Suzuki Swift 3 and other models)

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a roof bars connector cover replacement model. It was designed and tested on a Suzuki Swift 3 car to replace a lost cover, but should work for other Suzuki models and even other brands. It's parametric, so it should be easy to adapt to your needs. The included Supports STL can be used with Slic3r or other slicers to limit the supports to the parts than could need them.