Rounded Tesla Model S & X Wall Charger Plug Holder - image

Files (1)

my_wall_connector_mod_attempting_new_holes.stl

STL

279.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
my_wall_connector_mod_attempting_new_holes.stl	Primary model	279.2 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Rounded Tesla Model S & X Wall Charger Plug Holder

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I really liked jakepoz's Tesla Wall Charger Plug Holder, but didn't like all the sharp edges. I rounded off the four corners and countersunk the screw holes so they don't stick out past the front face of the design. Works great (for cars delivered to the US market)!