Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Yakima_-_Whispbar_adapter.stl | Primary model | 16.7 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Whispbar Adapter for Yakima Bike Rack
Shared by
3DPrintedCarPartDescription
My Yakima bike rack for roof cross bars was purchased when I had a different car and square cross-section cross bars. I finally got around to adapting it for the airfoil cross-section Tesla Model S Whispbar cross bars with some 3D printed parts. The initial prototypes were printed with PLA, but the final parts are PETG. It's a super simple design and I didn't get fancy with contouring, but it seems to work.
Compatible Cars
Originally published on thingiverse.com by Karl Bloss (MuskegonEVGuy) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
