S197 Mustang base plate with indents for flip switch holder - image

Files (1)

S197_Mustang_cover_plate_with_holes_for_flip_switch_holder.stl

STL

31.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
S197_Mustang_cover_plate_with_holes_for_flip_switch_holder.stl	Cover / cap	31.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

S197 Mustang base plate with indents for flip switch holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

this plate will fit into your S197 mustang and hold my other project that holds two toggle/flip switches. you can find this here: https://www.thingiverse.com/thing:5635393. this is a easy way to add these to your car without having to drill anywhere.