Files (1)

S2kBatteryTD.stl

STL

204.5 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
S2kBatteryTD.stl	Primary model	204.5 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation in slicer for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

S2000 Battery Tie-Down

0 downloads160 views0 likes

Shared by

Michael Chen

Verified

Description

Redesigned based off original to show S2000 logo. Uploaded STP file for anyone that would like to customize. If it's seems to be bending too much you can place it on top of the Honda battery bracket.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Honda (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.