Honda Emblem with M5 (5mm) screws - image

Files (2)

Honda_Emblem_-_M5_screws.stl

STL

788.1 KB

Custom_M5_nut.stl

STL

386.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Emblem_-_M5_screws.stl	Printable file	788.1 KB STL	26g $0.63	28g $0.68	62g $1.49	Ensure proper orientation in the slicer for optimal support generation
Custom_M5_nut.stl	Printable file	386.3 KB STL	20g $0.48	22g $0.52	47g $1.14	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Honda Emblem with M5 (5mm) screws

5 downloads1.6K views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Michael Chen

Verified

Description

I remixed this design: https://www.thingiverse.com/thing:2782648. I added M5 (5 mm) screws to the back of the emblem. I made this for a grill I bought from ebay for my Acura TSX wagon, which was sold as a Honda Accord in Japan and Europe. I had to file the holes of the emblem area on the grill to fit this. I've also added an M5 size nut to go with it. You will need to print two copies of the nut at about 90% to 95% scale for a good fit. I made it using customizer on thingiverse. For pictures and the full story see my post in this forum: https://acurazine.com/forums/second-generation-tsx-discussion-2009-2014-143/2013-tsx-grill-swap-961900/page2/#post16355007