Files (2)

Boneloc_Trunk_Hook_09_Accord_Long.stl

STL

244.6 KB

Boneloc_Trunk_Hook_09_Accord.stl

STL

244.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 10% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
Boneloc_Trunk_Hook_09_Accord_Long.stl	Printable file	244.6 KB STL	30g $0.73	25g $0.60	72g $1.73	Print with a low layer height (.03mm) for better surface finish
Boneloc_Trunk_Hook_09_Accord.stl	Printable file	244.6 KB STL	30g $0.73	25g $0.60	72g $1.73	Print with a low layer height (.03mm) for better surface finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Boneloc Trunk Hooks

0 downloads232 views0 likes

Shared by

Michael Chen

Verified

Description

Hooks for the trunk of a 2009 Honda Accord. The longer version lets heavy items rest on the trunk floor while keeping them from rolling around. The holes in the trunk that the hooks snap into are 68mm x 30mm. Other Honda models may have the same sized holes. Print on Low (.03mm) with 60% infill. No rafts or supports.