Files (1)

rev7.stl

STL

2.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
rev7.stl	Primary model	2.1 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Saab 9-3 NG iPhone 6 holder

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a Iphone 6 holder that is designed to fit to the Saab 9-3 NG. It has holes cut out for the charging port, the 3.5mm headphone jack and the speaker. The holder is designed to work with a iPhone 6 with a thin TPU case. A plain iPhone will fit but might sit somewhat loose. The holder fits with the snap on clip at the top of the dashboard to the right of the steering wheel. For more stability a double sided tape can be placed on the back. This was printed with PLA.