Files (1)

Saab_Speaker_Tab.STL

STL

29.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Saab_Speaker_Tab.STL	Primary model	29.6 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Saab Speaker Mount Tab

0 downloads95 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These are spacer mounting tabs for mounting Pinoeer TS-G1345R 5 1/4 inch speakers into the factory speaker cup mounts. I have a 2002 Saab 9-3. This may also work for the same generation 1999 to 2002 9-5. The screws used are the ones that came with the vehicle and self-tapping screws that came with the Pioneer speakers that I purchased.