Samsung Galaxy S7 case/mount for Dodge Grand Caravan (2010) - image

Files (2)

Dodge_Grand_Caravan_Dash_cup.stl

STL

35.7 KB

S7_Phone_Case.stl

STL

855.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dodge_Grand_Caravan_Dash_cup.stl	Printable file	35.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
S7_Phone_Case.stl	Printable file	855.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Samsung Galaxy S7 case/mount for Dodge Grand Caravan (2010)

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My van has this useless hole in the dash. I came across an_da_liu's cool mp3 player designed to fit exactly in that spot and decided to make this. It took a few versions, including one that hard mounted the cellphone case to the part that goes into the dash (this needed support, LOTS of support, it looked like I had printed a brick.. This version is pretty good. It allows you to just lift off the phone, while in its case. A notch in the back of the phone case marries to a tab on the dash "cup" I added a small lip and a divider in the cup if one wanted still use it for change etc UPDATE - I modified the design of the phone case to strengthen the lower tabs. I think I got the holed in the right place and size to allow for most 1/8 plugs and charger plugs, while keeping the strength intact. I also separated in to two stl files.

Compatible Cars

2010 Dodge Grand Caravan

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Mike Bourgeault (mikebourgeault) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.