Scharnier klep armsteun VW Passat '98 - image

Files (1)

3Armsteun_passat1.stl

STL

803.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
3Armsteun_passat1.stl	Primary model	803.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with the pin side up as instructed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Scharnier klep armsteun VW Passat '98

0 downloads171 views0 likes

Shared by

Michael Chen

Verified

Description

Replacement part for an armrest cover hinge for a VW-Passat '98. Two files. Left and Right leg. Print the files on the side with the pin up. (with support).

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Volkswagen Passat

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.