Files (2)

VW_PassatB5_Speaker_adapter.stl

STL

165.7 KB

VW_PassatB5_Water_Protector.stl

STL

75.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_PassatB5_Speaker_adapter.stl	Printable file	165.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
VW_PassatB5_Water_Protector.stl	Printable file	75.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

VW PassatB5 Speaker adapter

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this design because no store adapters or other models on thingiverse would fit my ground zero gzrk 165sq 6,5" speakers. I also made a water ring so the speaker won't die from water dripping down from the window.