Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Seat Ibiza 6K antenna holder
Shared by
3DPrintedCarPartDescription
Part I made for my Seat Ibiza 6K1. It's based on OEM part 6K0035539, so is valid for Seat Ibiza (1993-1996), Toledo (1992-1996), Inca (1996-2003) and Cordoba (1993-1996). This antenna holder is for driver's side mounted antenna, not the one mounted on the roof (like later car models). Intended to replace the original antenna (which is also broken) with a custom one that uses a 6mm connector. The connector is wired to the remaining shaft and this connection is hidden into the printed part. Then, the printed part is attached with glue. WORK IN PROGRESS. As my antenna holder disintegrated from wear, I had to work with pictures to get the measurements right. The part will be updated with real values.
Compatible Cars
Originally published on thingiverse.com by Samoxiaki Pussyawa (Samoxiaki) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
