Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | TPU 20% | TPU 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| VAG_AUDI_windshield_fluid_filling_funnel_4_perimeters_version.obj | Printable file | 1.3 MB OBJ | Slice file | Slice file | Slice file | Ensure the funnel is printed with a snug fit for the 45mm filling hole |
| VAG_AUDI_windshield_fluid_filling_funnel_spiral_vase_version.obj | Printable file | 1.4 MB OBJ | Slice file | Slice file | Slice file | Ensure the funnel is printed with a snug fit for the 45mm filling hole |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Wiper fluid funnel VAG AUDI VW SKODA SEAT
Shared by
3DPrintedCarPartDescription
I was frustraded with the way the VAG people expect you to have three hands when filling in wiper fluid on my Audi A4. Two for holding the canister of fluid and one for holding back the fill hole cover. I decided to make a spout / funnel for this. The diameter of the filling hole in the Audi is 45mm so perhaps this fits other cars as well. The idea is that it would be somewhat of a snug fit, for me that has worked out at least with the non spiral vase version. The version shown in the first picture (on the car) had a air release channel, it turned out that there is no use so I did not continue with publishing that version. I recommend printing this with TPU, other flex materials might be too soft. The spiral vase version might be too soft also.
Originally published on thingiverse.com by Chris Bose (Risto_P) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
