Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
SEAT Leon MKIII DSG Paddle Shifters Extension
Shared by
3DPrintedCarPartDescription
Después de muchas horas de diseño, he decido compartir con la comunidad mi diseño de los extensores para las levas DSG del grupo VAG. Están probadas en SEAT LEON MKIII CUPRA. La distancia entra las manos están corregidas para que no sea molesto durante la conducción. Esta separado en dos piezas para que le impresión quede mejor. Luego hay que unir utilizando 2 tornillos avellanados de 3x6. La unión a la leva original se hace con pegamento 3M de doble cara. Preferencia de impresión: Relleno: minimo 30% Altura de capa: 0.2 - 0.1 Soportes: Sí (solo en la pieza de unión entre la leva original y el extensor). *Las piezas ya estan colocadas para imprimir directamente. Recomiendo usar techo de soporte. Postprocesado: Yo he utilizado resina epoxy autonivelante especial para impresiones 3D y después de lijar y pintar el resultado es satisfactorio. Si te gusta mi diseño, considera hacer un donativo por Paypal usando el botón "TIP DESIGNER". Esta totalmente prohibida la venta de este diseño sin autorización expresa. ------- After many hours of design, I decided to share with the community my design of the extensions for the DSG Paddle Shifters for the VAG group. It is tested on SEAT CUPRA. The distance between the hands is corrected so that it is not annoying while driving. It is separated in two pieces for a better impression. Then it is necessary to using 2 countersunk screws of 3x6. The connection to the original cam is made with 3M double-sided glue. Printing preference: Fill: minimum 30%. Layer height: 0.2 - 0.1 Supports: Yes (only in the piece of union between the original paddle and the extender). *The pieces are already placed to print directly. I recommend using a roof support. Postprocessing: I have used special self-levelling epoxy resin for 3D impressions and after sanding and painting the result is satisfactory. If you like my design, consider making a donation through Paypal using the button "TIP DESIGNER". It is totally forbidden to sell this design without express authorization.
Compatible Cars
Originally published on thingiverse.com by Leonardo Ov (leovade) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
