SH9 Forester Water Temp Gauge - As seen on Nevs Garage - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

SH9 Forester Water Temp Gauge - As seen on Nevs Garage

0 downloads36 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

AS SEEN ON OUR YOUTUBE CHANNEL "NEVS GARAGE" Subaru Gen3 "SH9" Foresters do not have a temperature gauge - CRAZY AYE!! This is a gauge cup to suit an 'Eluto' branded gauge to mount in front of the factory instrument cluster, making it not too conspicuous but still very visible. Please watch our fitment guide here: https://youtu.be/0WK1Kvjjt2Q And of course if you care, post a make here on Thingiverse and subscribe to our Youtube Channel! Let's get into it!