Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| cover_photo.stl | Cover / cap | 197.8 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
| godIHopeThisWorks8.STL | Printable file | 131.1 KB STL | Slice file | Slice file | Slice file | Ensure proper fit and orientation in the slicer before printing |
| subaru_legacy_bezel.stl | Printable file | 197.8 KB STL | Slice file | Slice file | Slice file | Ensure proper fit and orientation in the slicer before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tablet Bezel for 2005-2009 Subaru Legacy
Shared by
3DPrintedCarPartDescription
This is a bezel I designed to fit into the center of the dash between the two vents. More info here http://csmatt.com/notes/?p=5. The original was fiberglass, but I wanted a model I could easily tweak in order to allow for a different tablet to be used. I'll try to update this with pics of how everything fits together with the printed plastic version.
Compatible Cars
Originally published on thingiverse.com by Matt Anonymous (mattanonymous) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
