Single DIN radio slot gauge mount (2006 subaru legacy GT) - image

Files (2)

gauge_mounting_bracket.STL

STL

55.4 KB

gauge_plate.STL

STL

169.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
gauge_mounting_bracket.STL	Mount / bracket	55.4 KB STL	Slice file	Slice file	Slice file	Ensure the gauge mounting bracket and plate are properly aligned during printing
gauge_plate.STL	Printable file	169.8 KB STL	Slice file	Slice file	Slice file	Ensure the gauge mounting bracket and plate are properly aligned during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Single DIN radio slot gauge mount (2006 subaru legacy GT)

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This gauge mount will only work when using a double DIN radio slot as shown in the photos. The radio trim that is shown in the pictures is the JDM HVAC panel which allows for dual climate control. The only other kit this will fit is the dual DIN with manual controls. The bracket will also fit any standard 52mm aftermarket gauge. I have also included the solidworks part files so that these designs may be modified easily. Please remember to credit me if you do use these parts and post photos!!!