Shift Knob Insert for BMW vehicles - image

Files (1)

Insert_0.2.STL

STL

33.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Insert_0.2.STL	Primary model	33.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the insert and the wooden shift knob

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift Knob Insert for BMW vehicles

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a custom wooden shift knob for my e30 and I was using a hacked up piece to let it sit on the shaft. This is going to be glued into my wooden shift knob so it will sit on the shaft correctly. The outer diameter could be changed to fit a different shift knob design. I'm not planning to update this file but let me know if you have suggestions or need a different file type.