bushing_marcha.stl

STL

755.9 KB

bushing_marcha_v4.stl

STL

663.9 KB

bushing_marcha_v4_Cut_1.stl

STL

348.5 KB

bushing_marcha_v4_Cut_2.stl

STL

348.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

27g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.65

Filament only at roughly $24/kg PETG / ASA

Print time

46m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bushing_marcha.stl	Printable file	755.9 KB STL	25g $0.60	27g $0.65	59g $1.42	Ensure a brim or raft is used for stability if necessary
bushing_marcha_v4.stl	Printable file	663.9 KB STL	24g $0.57	26g $0.62	56g $1.35	Ensure a brim or raft is used for stability if necessary
bushing_marcha_v4_Cut_1.stl	Printable file	348.5 KB STL	19g $0.44	20g $0.48	44g $1.06	Ensure a brim or raft is used for stability if necessary
bushing_marcha_v4_Cut_2.stl	Printable file	348.0 KB STL	19g $0.44	20g $0.48	44g $1.06	Ensure a brim or raft is used for stability if necessary