Single Din Pocket Plus Custom Files
Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Paul Johnson (Diedtrying)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
I've uploaded a simple pocket design in addition to what you see pictured. This is without the slots for the voltmeter and the switch. I've also attached the Fusion 360 file for you to modify if you need. I'm not sure what holes this will fit, but it fits in my 2000 Tacoma, and my understanding is that the holes are relatively universal. If you are curious about what the rest of my project was read further down. Most important is to not print this in PLA. PLA has a glass temp that is too low for use inside of vehicles. I chose to use PETG as it prints easily and has a high enough glass temp. ABS would also work well. Pick your material carefully. I've had this in mind for a project for a while and couldn't find anything that fit my needs. I wanted two LCD Voltmeters for the two batteries I have in my truck. This also required a "Double Pole Single Throw" switch to have the voltmeters run to each batter seperately, yet only need one switch to turn on both. The voltemeters I used: https://smile.amazon.com/gp/product/B00BZPH6KQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The switch I used: https://smile.amazon.com/gp/product/B00004WLK9/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Compatible Vehicles
Originally published on thingiverse.com by Paul Johnson (Diedtrying) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
