Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| klammer2.stl | Printable file | 25.1 KB STL | 9g $0.21 | 9g $0.23 | 21g $0.49 | Ensure proper bed adhesion to avoid warping |
| klammer3.stl | Printable file | 32.4 KB STL | 9g $0.22 | 10g $0.24 | 22g $0.52 | Ensure proper bed adhesion to avoid warping |
| klammer4.stl | Printable file | 55.0 KB STL | 10g $0.25 | 11g $0.27 | 25g $0.59 | Ensure proper bed adhesion to avoid warping |
| klammer5.stl | Printable file | 74.2 KB STL | 11g $0.27 | 12g $0.29 | 27g $0.64 | Ensure proper bed adhesion to avoid warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Skoda Fabia 2 (2008) rear shelf clip
Shared by
3DPrintedCarPartDescription
I designed this Part in Autodesk Inventor for my rear shelf because the clip part was broken. After the printing was done i polished the remain clip part and after thet i screwed it on my rear shelf as seen at the picture. (The screw size can be seen on the pictures at mm size) The part that was the best for me was klammer5.stl but you can try the other wann to.
Compatible Cars
Originally published on thingiverse.com by Adam Szekely (szekelymada2) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
