Skoda Fabia II Window Switch Fixation Clip - image

Files (1)

Skoda_Fabia_Window_Switch_Fixation.stl

STL

61.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Skoda_Fabia_Window_Switch_Fixation.stl	Primary model	61.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Skoda Fabia II Window Switch Fixation Clip

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I recently had to fix the double window switch on the driver's side of a Skoda Fabia 2. While disassembling the window switch, one of the little clips on the backside of the switch broke (see red arrow on the photo). These 4 clips (or respectively teeth) hold the window switch together and bear the loads when the switch is used. I think that nearly no one will need this thing, but if you do, it might save you the money of buying a new switch. Simply print out the fixation clip, put it over the backside of the window switch and et voilà the backside is fixed to the window switch housing again.