Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Skoda_Fabia_Fuel_Cap_Holder_Remix.stl | Cover / cap | 2.5 MB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and supports unlikely, but verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Skoda Fabia 3 Fuel Cap Holder improved version
Shared by
3DPrintedCarPartDescription
i did a quick remix and added a second hook, as i found the where the original hook was, the fuel cap could still impact the body of the car. that issue is now fixed. i have built in supports between the two hooks, so support is only required from the build plate. i would also print on edge as the original STL file is, and add a smallish BRIM i used 4mm and it prints fine. the design also fits the 2018 rapid as tested. cant say for sure if it works with other models.
Compatible Cars
Originally published on thingiverse.com by Jason Munro (Hostile17) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
