Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Skoda Fabia Gen1 Cup Holder
Shared by
3DPrintedCarPartDescription
My friend broke a cup holder in his Škoda Fabia (1st gen) so I made him a replacement. Improved.:o) I printed this from CFJet (PETG with carbon), however regular PETG or even ABS also work. Few small supports are necessary (but only from buildplate). After the print I would recommend a bit sanding or even re-drilling the parts (especially knobs) to ensure everything have correct dimensions and is relatively smooth. It was difficult and complex design and it is not super easy to print correctly either. There is probably not many Škoda Fabia 1st gen users but let me know if you any need help or more information. Anyway it was very time-consuming design so feel free to tip me when you use this model.:o) https://youtu.be/29udHL65xPc
Compatible Cars
Originally published on thingiverse.com by Jakub Geyer (jgeyer) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
