Files (1)

Holder_L.stl

STL

2.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Holder_L.stl	Mount / bracket	2.2 MB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Skoda Fabia Gen1 Cup Holder

0 downloads31 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely, verify in slicer

Infill

20-30% infill with 2-3 walls for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My friend broke a cup holder in his Škoda Fabia (1st gen) so I made him a replacement. Improved.:o) I printed this from CFJet (PETG with carbon), however regular PETG or even ABS also work. Few small supports are necessary (but only from buildplate). After the print I would recommend a bit sanding or even re-drilling the parts (especially knobs) to ensure everything have correct dimensions and is relatively smooth. It was difficult and complex design and it is not super easy to print correctly either. There is probably not many Škoda Fabia 1st gen users but let me know if you any need help or more information. Anyway it was very time-consuming design so feel free to tip me when you use this model.:o) Category: Automotive.