Skoda Fabia II hat rack holder - Halterung Hutablage - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Skoda Fabia II hat rack holder - Halterung Hutablage

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement holder for the hat rack of a Skoda Fabia II Model. Skoda built a defective hat rack holder which was integrated into the trunks side panel. A terrible construction - making it even more terrible once that little nub breaks. It meant to replace the complete side panel. Now, this litte plate can be drilled over the hole of a broken holder. Best printed vertical - this way it will be more sturdy. Edit: I have uploaded a 2nd version - that one has a flat edge. I noticed that while mounting the round version works - it is a very tight fit. The version with the flat tire fits better.