SKODA FABIA TRUNK SHELF MOUNT REINFORCED !! - image

Files (1)

skoda_fabia_2__Trunk_shelf_mount_reinforced_M3_10_mm_flathead_screw_v1.stl

STL

678.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
skoda_fabia_2__Trunk_shelf_mount_reinforced_M3_10_mm_flathead_screw_v1.stl	Mount / bracket	678.5 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

SKODA FABIA TRUNK SHELF MOUNT REINFORCED !!

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hi, i've desinged my own remix of this thing (https://www.thingiverse.com/thing:4568389) whitch is great! I've pirnted 3 of those and center pin simply broke off.. So i made a reinforced version whitch contains: thicker base (stronger), filet around shelf pin for durability, screw insert for handeling more weight and preventing cracking off this model is for left side. if you need right side just mirror it.