Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ConsoleHolder.stl | Mount / bracket | 27.3 KB STL | Slice file | Slice file | Slice file | Print in the orientation as provided to avoid clasp breakage |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Skoda Fabia MK1 Console Phone Holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability in car conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer, likely for bottom concave part and notch
Infill
cubic infill with 2-3 perimeters
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a phone holder for guiliopierucci 's SKODA Fabia Console Phone Holder. The original model replaces the empty buttons below the warning lights button with a place where you can add different attachments. My phone holder is made to fit a Samsung A34 with a wallet style case. I have added the Fusion360 file for easier modification, as every phone & case combination will have different measurements. The G-code files below have been sliced for good orientation and strenght. Printing instructions for the Phone Holder: Cubic infill; 2-3 perimeters; 0.2 quality preset on the Mini+; Automatic Smartfill supports on overhangs only via the PrusaSlicer (basically supports should only on the bottom concave part and the notch behind that attaches to the console holder); Printing instructions for the Console Phone Holder: Print in the orientation as is, if you flip the model to reduce support material, the clasps can break when trying to insert or remove from the console; Automatic Smartfill supports on overhangs only via the PrusaSlicer (basically supports should only be done for the bottom concave part and the notch behind that attaches to the consol holder); Another model that you can print together with this one is Jan Tomášek 's Drinks Holder, which I also sliced to print myself.
Compatible Cars
Originally published on printables.com by BlackFury · License: CC BY-SA
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Skoda Fabia MK1 Radio Cover Top
SKODA Fabia Console Empty Button
Yoda Fabia Front Emblem
Skoda Fabia Dashcam holder
Skoda_Cetral_Wheel_Cap_Customized
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
