Slightly Higher RAV4 PopSocket Holder - image

Files (1)

HigherPopSocketHolder.stl

STL

175.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.38

Filament only at roughly $24/kg PETG / ASA

Print time

27m–45m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HigherPopSocketHolder.stl	Mount / bracket	175.2 KB STL	15g $0.35	16g $0.38	35g $0.83	Ensure the model is oriented to minimize supports in your slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Slightly Higher RAV4 PopSocket Holder

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I really liked youkai's original design, but it mounted the phone about 1cm too low for me. A couple minutes in TinkerCAD easily fixed that. Please see the original thing (https://www.thingiverse.com/thing:2839187) for the support arms.

Compatible Cars

Toyota RAV4

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Gary D (garyd9) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.