Slim tablet back seat mount for Tesla Model 3/Y - image

Files (5)

Tesla_Tablethalter_base.step

STEP

193.5 KB

Tesla_Tablethalter_base.stl

STL

95.9 KB

Tesla_Tablethalter_hook.step

STEP

59.6 KB

Tesla_Tablethalter_standard.stl

STL

37.6 KB

Tesla_Tablethalter_wide.stl

STL

37.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Tablethalter_base.step	Printable file	193.5 KB STEP	Slice file	Slice file	Slice file	Position the base at an angle for a clean front surface finish
Tesla_Tablethalter_base.stl	Printable file	95.9 KB STL	Slice file	Slice file	Slice file	Position the base at an angle for a clean front surface finish
Tesla_Tablethalter_hook.step	Printable file	59.6 KB STEP	Slice file	Slice file	Slice file	Position the base at an angle for a clean front surface finish
Tesla_Tablethalter_standard.stl	Printable file	37.6 KB STL	Slice file	Slice file	Slice file	Position the base at an angle for a clean front surface finish
Tesla_Tablethalter_wide.stl	Printable file	37.7 KB STL	Slice file	Slice file	Slice file	Position the base at an angle for a clean front surface finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Slim tablet back seat mount for Tesla Model 3/Y

0 downloads64 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Printing: Please see attached example image of the slicer. I recommend positioning the base at an angle so that the later visible front surface looks nice. Support structure is necessary for this. STEP-Files are included. Feel free to modify as you like it. Assembly: Slide the hook into the base. Connect the eyelets with rubber band. Feel free to usw different rubber bands to create the desired traction. There are 2 hooks included in this package. The hook called "wide" is 5mm wider to possibly hold tablets with the case open and folded. Installation: Simply insert the base between leather and paneling on the rear seat, and you're done. Usage: Pull the hook up a little, insert your tablet into the holder and release the hook again. The tablet is now fixed in the holder by the tensile force of the rubber band. Tips: Self-adhesive felt on the back of the lower support arms prevents rattling noises while driving if necessary.