Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Model_Y_Center_Screen_Mount_v1.stl | Mount / bracket | 71.6 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit to avoid damaging the center screen |
| Model_Y_Center_Screen_Mount_v2.stl | Mount / bracket | 38.2 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit to avoid damaging the center screen |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model Y Center Screen Mount
Shared by
3DPrintedCarPartDescription
Tesla Model Y Center Screen Mount 7/21/21 - This is a little mount I created for my radar detector to sit right above the center screen of my Model Y. Not sure how well it will stay put in the vehicle as I have just printed it. I am not responsible if this causes any damage to your screen! Use at your own risk! 7/22/21 - V2 has been uploaded with more surface area on the back to make the mount a bit more secure. You can also add a bit of double stick foam tape to the recessed section to absolutely make sure it does not go anywhere!
Compatible Cars
Originally published on thingiverse.com by Mukul Kewalramani (b00st3d) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
