Small & Simple Tesla Model 3 Phone Mount - image

Files (1)

Small__Simple_Tesla_Model_3_Phone_Mount.stl

STL

3.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 18%	100% solid	Recommendation
Small__Simple_Tesla_Model_3_Phone_Mount.stl	Mount / bracket	3.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Small & Simple Tesla Model 3 Phone Mount

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A small and simple phone mount that clips into the air vent of the Model 3. I tested a few different mounting options including magnetic mounts next to the touchscreen, but wanted a simple design thats behind the steering wheel. I found this nice clip https://www.thingiverse.com/thing:3789277 and had an idea to make a better version. Its much smaller and flat, so its quick and easy to print. Also better for Storage in the center console. I printed mine with flex filament (15% Infill), because of the higher grip and the ability to squeeze and stretch without leaving scratches or breaking. I think PETG or PLA would also be possible, but you may have to play with infill and wall thickness for the right amount of flex that is needed. Keep in mind that a PLA or Flex Version can't stay on the dash in summer, because of the low heat resistance. The size is designed for my 5.5" phone, but 5" or 6" should also fit (depending on the flex of your material). If you have any ideas to make it better, feel free to add a comment. Enjoy!