Files (3)

3-12_rivet.stl

STL

1.0 MB

bottom-knob-troopy.stl

STL

3.6 MB

top-troopy-knob.stl

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
3-12_rivet.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure a brim is used for extra adhesion security as designed
bottom-knob-troopy.stl	Printable file	3.6 MB STL	Slice file	Slice file	Slice file	Ensure a brim is used for extra adhesion security as designed
top-troopy-knob.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure a brim is used for extra adhesion security as designed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Split shift knob 50mm diameter

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Made a 50mm diameter knob and removed all gear numbers on top. Split the knob on the equator for easily print flat with PETG. I added a brim for extra security. Assembles with 3 little pegs with friction. Remix of https://www.thingiverse.com/thing:902091