Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tlacitko.stl | Printable file | 1.5 MB STL | 34g $0.81 | 37g $0.88 | 80g $1.92 | Ensure proper orientation in the slicer for optimal printing |
| tlacitko1.3mf | Printable file | 6.2 MB 3MF | 63g $1.50 | 68g $1.63 | 149g $3.58 | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
steering wheel volume button for BMW
Description
This is a spare part for steering wheel on BMW X5 E53 and X3 E83, perhaps other models. My volume button was broken and normal solution was buy new steering wheel, but is very expensive and my is in good condition except this button. I decided to model and print one. Model is proper sized and ready for print. I use my PRUSA I3 MK3 and COLORFAB XT clear filament with 0,05mm settings. Final stepp is painting and scratching characters + and -.
Compatible Cars
Originally published on thingiverse.com by Pavel G. (Pajap40) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
