Storage Pot for Car Drinks Holder - image

Files (2)

MoneyCup-Cup.stl

STL

26.6 MB

MoneyCup-Lid.stl

STL

7.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MoneyCup-Cup.stl	Printable file	26.6 MB STL	Slice file	Slice file	Slice file	Ensure the hinge area is clear of supports for proper movement
MoneyCup-Lid.stl	Printable file	7.5 MB STL	Slice file	Slice file	Slice file	Ensure the hinge area is clear of supports for proper movement

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Storage Pot for Car Drinks Holder

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a small lidded storage pot to fit in a car drinks holder. I designed it for the side holder on a UK spec Mazda MX-5 Mk3 but it will fit any other circular holder around 75mm diameter, or any other with a bit of resizing. I wanted this for coin storage and will line it with thin foam sheet to reduce rattling. I printed this in carbon fibre filament with 5 shells so the body is solid. The lid is hinged with a short length of 1.75mm filament held in with a drop of glue.