Subaru Crosstrek GoPro Vent Mount - image

Files (1)

Subaru_Crosstrek_GoPro_Vent_Mount.stl

STL

1.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Subaru_Crosstrek_GoPro_Vent_Mount.stl	Mount / bracket	1.3 MB STL	46g $1.10	50g $1.20	110g $2.63	Verify support generation in your slicer for the clips

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Subaru Crosstrek GoPro Vent Mount

0 downloads169 views0 likes

Shared by

Michael Chen

Verified

Description

A GoPro double clip mount which snaps into/over the air vents of a 2014 Subaru Crosstrek. Holds my phone fairly solidly while driving. It could maybe be tightened up a hair without being too tight to get in and out easily, but so far that doesn't seem necessary. We'll see how it maintains its springiness in the summer heat. Edit: needed to be sized up and beefed up a bit. Black PETG. You need supports for the clips.