Subaru D-shackle towing isolator - image

Files (2)

Tauekrok_foring_v_2.stl

STL

38.4 KB

Tauekrok_v_2.stl

STL

189.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

16g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.39

Filament only at roughly $24/kg PETG / ASA

Print time

28m–46m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tauekrok_foring_v_2.stl	Printable file	38.4 KB STL	10g $0.23	10g $0.25	23g $0.54	Ensure proper orientation for minimal supports
Tauekrok_v_2.stl	Printable file	189.0 KB STL	15g $0.36	16g $0.39	36g $0.86	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Subaru D-shackle towing isolator

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Adapters to mount a D-shackle to your factory subaru eye hook. The adapters will obviously break if you tow your vehicle with them in place, but they allow you to permanently mount a D-shackle to the front or back of your subaru so you can look like you mean business.

Compatible Cars

Subaru (all models)

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Brage Fjærvik-Braa (Brafja) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.